Terraseal
Cementitious acrylic moisture barrier coating for facade & curtain walls
TERRACO ACRYLIC
Terraseal is an economical, two-component, cement based, polymerized, permanently waterproof, flexible barrier coating suitable for use
as a moisture barrier on facades and behind curtain walling.
Area of Use
• Moisture barrier
• Facade waterproofing
• Curtain wall waterproofing
Consumption Rate
1.9 – 2.9 kg/m2 for 1-1.5mm total thickness
Packaging
25kg
Unit
Combi pack: Terraseal Resin: 5kg Jerrican
Terraseal Powder: 15kg Paper Bag
Shelf Life
12 months in original unopened containers.
Categories: Terraco Acrylic Waterproofing, Waterproofing
Make an inquiry
Related products
Plastifelt Fibre
Fibre reinforced polymer modified bituminous waterproofing
Properties
• Excellent resistance to positive water & vapor pressure
• Good flexibility. Can take structural movements
• Good dimensional stability under tension
• Resistant to water borne chemicals
Description
Plastifelt is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers, which
are blended together to obtain good waterproofing properties. The
bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement core of non woven glass fibre carrier.
Polythane P
Liquid applied waterproofing and protective coating based on hybrid polyurethane
Properties
• Forms a highly elastomeric, tough and resilient membrane.
• ZEnvironmentally friendly. Low VOC
• Coal tar free
• Single component. Easy to apply.
• High tensile strength & elongation
• Excellent crack bridging properties.
• Excellent UV resistance, weatherability & color retention properties
• Excellent resistance to water and vapour.
• High resistance against chlorides, sulphates, bacteria, oil and common
fuels
Description
Polythane P is a liquid applied waterproofing and protective coating for concrete
structures based on a hybrid polyurethane. The polyurethane is modified
with specially selected polymers to form a tough, flexible and durable
coating. It is completely free from coal tar and other hazardous ingredients.
Polytex
Elastomeric acrylic waterproofing and protective coating
Properties
• Single component, easy to apply
• Protects exposed concrete structures against carbonation and ingress of
atmospheric gases and salts
• Excellent UV resistance
• Elastomeric- high crack bridging capability
• Excellent adhesion to most of the substrates
• Good resistance to dilute acids, alcohol, hydrocarbons, chloride and
sulphate ions
Description
Polytex is a single component, elastomeric, acrylic waterproofing and
protective coating. Polytex upon curing forms a tough, flexible and durable
coating which is resistant to UV and other weathering agents.
Polycoat
Bitumen emulsion paint
Properties
• Anti-fungal
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Can be applied in closed or confined spaces
• Water-based
Description
Polycoat is an emulsified thixotropic bitumen protective coating. The coating
dries to form a black flexible protective film. The finished film forms a
tough barrier to vapor transmission.
Polyseal PS PG
2 part pouring grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life–won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic. Can be used in potable water applications, swimming pools
Terraproof
Cement water proofing compound
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
Area of Use
• Terraproof is ideally suited to all external finishing needs where
moisture needs to be contained or excluded.
For example - backing coats of thin layer Terramix plaster.
Consumption Rate
Terraproof should be mixed with cement in the ratio of 1kg of
Terraproof to every 50kg bag of cement
Packaging
1kg
Unit
Plastic Bag
Shelf Life
6 months in original unopened packs
Polycryl FR
Acrylic based flexible vapor proof protective coating
Properties
• Class A fire rated (0,10)
• Environmentally friendly. Low VOC (<10 g/L)
• Excellent UV, weatherability & color retention properties
• Single component. Easy to use
• Cold applied
• Excellent resistance to vapor and moisture
• Excellent resistance to carbon dioxide diffusion
• Excellent resistance to chloride ion penetration
• Breathable
• Good abrasion resistance properties
• Heat resistant
• Excellent adhesion on most porous and nonporous
• substrates
Description
Polycryl FR is a an acrylic based single component, class A fire-rated
protective coating especially designed as moisture vapor barrier on facades
application.
Polycryl PF
Single component, acrylic waterproofing and protective coating
Properties
• Excellent UV, weatherability & color retention properties
• Single component. Easy to use
• Excellent resistance to water and moisture
• Breathable
• High solar reflectance
• Environmentally friendly. Low VOC (<10 g/L)
• Excellent adhesion on PU Foam and most porous
• substrates
Description
Polycryl PF is a single component, acrylic waterproofing and protective
coating especially designed for PU Foam on roof applications. Polycryl PF
upon curing forms a tough, flexible and durable coating which is resistant
to UV and other weathering agents, due these factors the coat will be perfect
bonded to PU Foam surface, representing the safest option for both permanent
and temporary exposed roofs