Polytex
Elastomeric acrylic waterproofing and protective coating
Properties
• Single component, easy to apply
• Protects exposed concrete structures against carbonation and ingress of
atmospheric gases and salts
• Excellent UV resistance
• Elastomeric- high crack bridging capability
• Excellent adhesion to most of the substrates
• Good resistance to dilute acids, alcohol, hydrocarbons, chloride and
sulphate ions
Description
Polytex is a single component, elastomeric, acrylic waterproofing and
protective coating. Polytex upon curing forms a tough, flexible and durable
coating which is resistant to UV and other weathering agents.
Categories: Acrylic Coatings, Waterproofing
Make an inquiry
Related products
Terraseal
Cementitious acrylic moisture barrier coating for facade & curtain walls
TERRACO ACRYLIC
Terraseal is an economical, two-component, cement based, polymerized, permanently waterproof, flexible barrier coating suitable for use
as a moisture barrier on facades and behind curtain walling.
Area of Use
• Moisture barrier
• Facade waterproofing
• Curtain wall waterproofing
Consumption Rate
1.9 - 2.9 kg/m2 for 1-1.5mm total thickness
Packaging
25kg
Unit
Combi pack: Terraseal Resin: 5kg Jerrican
Terraseal Powder: 15kg Paper Bag
Shelf Life
12 months in original unopened containers.
Polycryl PF
Single component, acrylic waterproofing and protective coating
Properties
• Excellent UV, weatherability & color retention properties
• Single component. Easy to use
• Excellent resistance to water and moisture
• Breathable
• High solar reflectance
• Environmentally friendly. Low VOC (<10 g/L)
• Excellent adhesion on PU Foam and most porous
• substrates
Description
Polycryl PF is a single component, acrylic waterproofing and protective
coating especially designed for PU Foam on roof applications. Polycryl PF
upon curing forms a tough, flexible and durable coating which is resistant
to UV and other weathering agents, due these factors the coat will be perfect
bonded to PU Foam surface, representing the safest option for both permanent
and temporary exposed roofs
Plastifelt Fibre
Fibre reinforced polymer modified bituminous waterproofing
Properties
• Excellent resistance to positive water & vapor pressure
• Good flexibility. Can take structural movements
• Good dimensional stability under tension
• Resistant to water borne chemicals
Description
Plastifelt is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers, which
are blended together to obtain good waterproofing properties. The
bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement core of non woven glass fibre carrier.
Polyseal 1PU
One part polyurethane joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
11
Sealants
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life – won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic once cured. Can be used in potable water reservoirs and
swimming pools
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
Description
Polyseal PS GG is a non slumping two component, chemically curing polysulphide
joint sealant. Polyseal PS GG is specifically designed to be used as
a watertight seal for moderate movement and control joints. It is based on a
liquid polysulphide polymer which when mixed with the hardener, cures to
form a tough, flexible and non staining rubber like seal. Polyseal PS GG has
excellent adhesion to concrete, stone, metals and other common building
substrates. The cured sealant has good resistance to most environmental
chemicals & resists deterioration on prolonged exposure to UV. Polyseal
PS GG is suitable for use in both vertical and horizontal applications. The
sealant has a Movement Accomodation Factor (MAF) of ±25%
Description
Polyseal 1PU is a one part low modulus high performance polyurethane
sealant, which cures on absorption of atmospheric moisture to form a firm
and flexible rubber watertight seal for moderate movement and control
joints. Polyseal 1PU can be used in both horizontal and vertical applications.
Polythane P
Liquid applied waterproofing and protective coating based on hybrid polyurethane
Properties
• Forms a highly elastomeric, tough and resilient membrane.
• ZEnvironmentally friendly. Low VOC
• Coal tar free
• Single component. Easy to apply.
• High tensile strength & elongation
• Excellent crack bridging properties.
• Excellent UV resistance, weatherability & color retention properties
• Excellent resistance to water and vapour.
• High resistance against chlorides, sulphates, bacteria, oil and common
fuels
Description
Polythane P is a liquid applied waterproofing and protective coating for concrete
structures based on a hybrid polyurethane. The polyurethane is modified
with specially selected polymers to form a tough, flexible and durable
coating. It is completely free from coal tar and other hazardous ingredients.
Flexiroof
Acrylic waterproof roof coating
XXXXXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
TERRACO ACRYLIC
A one pack roof coating with long life flexibility and is ideally suitable for use in areas with extreme climatic conditions. It is applied by
brush, spray or rubber squeegee and has >400% elongation.
Flexiroof is a highly flexible roof coating with good weather resistance. Due to its long life flexibility it is ideally suited for use in areas of
extreme climate conditions and has >200% elongation.
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminum sheets
• Wood
• PU Foam insulation
Consumption Rate
1.0 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminium sheets
• Fibre Cement sheeting
• Wood
• PU Foam Insulation
Consumption Rate
1.1 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Maxicrete
General purpose cementitious acrylic waterproof slurry
A high quality, versatile, permanent waterproofing system for roofs, facades, wet rooms and water retaining structures. The system will
adhere to new and old surfaces of precast and in-situ concrete.
An economical, two-component, permanent waterproofing system for concrete and masonry. After application, the Maxicrete system forms
a tough, durable waterproof coating.
Area of Use
Under tile application:
• Bathrooms
• Kitchens
• Balconies
Consumption Rate
• 2.2 - 3.7 kg/m² applied in 2 to 3 coats to achieve an overall
thickness of 1.4mm to 2mm.
• For under tile application: 1.4mm to 1.6mm total application
thickness is recommended.
Packaging
Combi pack : 20.9kg Pail [5kg resin (Jerrican) +
15kg powder (Bag) and 900ml primer
(Bottle)].
Regular pack : Resin: 5kg jerrican
Powder: 15kg paper bags
Shelf Life
12 months in original unopened containers
Flexicoat QS200
Single pack elastomeric waterproofing
Flexicoat QS200 is a single pack fast drying waterproof coating. It provides a highly flexible waterproof coating with excellent weather resistance.
Flexicoat QS200 has long life flexibility and is ideally suitable for use in areas with extreme climatic conditions.
Area of Use
• Under tile application in bathrooms, kitchens, and on rooftops
Consumption Rate
1-1.5 kg/m2
Packaging
3.6 litre / 18 litre
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers