Polycoat RBE 5
SBS modified bituminous coating
Properties
• Cold applied
• Single component, easy to apply
• Can be applied on damp substrates
• Asbestos free, odorless. Can be applied in closed or confined spaces
• Non-toxic
• Environmentally friendly. Low VOC
• Resistant against chloride and sulphate ions
• Has good adhesion to most building substrates
• Seamless/joint free
Description
Polycoat RBE 5 is rubber modified bitumen emulsion coating, which dries to
form a tough, seamless, flexible vapor proof protective coating.
Categories: Bitumen Coating, Waterproofing
Make an inquiry
Related products
Easybit 140kg
Bitumen emulsion
Properties
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Non- flammable
• Economical
Properties
• Anti-fungal
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Can be applied in closed or confined spaces
• Water-based
Properties
xxxxx
xxxx
xxxx
xxx
xxxxx
xxx
xxx
Description
Easybit is a thixotropic bitumen emulsion. The coating is dark brown in
color and dries to a black flexible protective film. The finished film forms a
tough barrier to water and vapor transmission.
Bituplus Ultra P4180
APP modified bituminous waterproofing membrane
Properties
• Polymer rich compound. Easy and strong seal on over
laps.
• High flexibility. Easy application on corner profiles and
detailings.
• High softening point. Does not leave shoe imprints or
makes the bitumen sticky during high temperature
applications.
• High resistance against hydrostatic pressure.
• Good dimensional stability under tension.
• User friendly printed films with stick timer aids easy
and correct application.
• High mechanical strengths and fatigue resistance prop
erties.
Terraproof
Cement water proofing compound
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
Area of Use
• Terraproof is ideally suited to all external finishing needs where
moisture needs to be contained or excluded.
For example - backing coats of thin layer Terramix plaster.
Consumption Rate
Terraproof should be mixed with cement in the ratio of 1kg of
Terraproof to every 50kg bag of cement
Packaging
1kg
Unit
Plastic Bag
Shelf Life
6 months in original unopened packs
Polyseal PS GG
2 part gun grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life – won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic once cured. Can be used in potable water reservoirs and
swimming pools
Bituprime SB
Solvent based bitumen primer
Properties
• Improves the adhesion between bitumen based sheet membranes and
coatings Cold applied, does not require heating Binder for dust particles
Anti corrosive
• Conforms to the following standards ASTM D 41 - Asphalt primer for
roofing, damp proofing and waterproofing BS 3416, Type A Class C -
Bitumen based coatings for cold application, suitable for use in contact
with potable water.
Description
Bituprime SB is a quick drying solvent based low viscosity bitumen primer.
It is used as a primer coat on masonry and concrete substrates to improve
the adhesion of bitumen based membranes and coatings.
Bituplus G 4140
Mineral Surfaced bituminous waterproofing membrane
Properties
• High resistance to positive water & vapor pressure
• Good heat resistance
• Good dimensional stability under tension
• High puncture and fatigue resistance
• High tensile and tear strengths
• Resistant to water borne chemicals
Description
Bituplus G 4140 is a high performance polymer modified bituminous
waterproofing membrane, surfaced with reflective natural color slates
to provide maximum protection against UV. The presence of the slates
provides a mechanical protection against light foot traffic and occasional
maintenance as well as offering an aesthetic surface. It is an ideal
membrane for roofing and exposed applications where it can be placed
on top of the existing surface and providing an economical and efficient
solution to leaking roofs.
Polyseal PS PG
2 part pouring grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life–won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic. Can be used in potable water applications, swimming pools
Polycryl FR
Acrylic based flexible vapor proof protective coating
Properties
• Class A fire rated (0,10)
• Environmentally friendly. Low VOC (<10 g/L)
• Excellent UV, weatherability & color retention properties
• Single component. Easy to use
• Cold applied
• Excellent resistance to vapor and moisture
• Excellent resistance to carbon dioxide diffusion
• Excellent resistance to chloride ion penetration
• Breathable
• Good abrasion resistance properties
• Heat resistant
• Excellent adhesion on most porous and nonporous
• substrates
Description
Polycryl FR is a an acrylic based single component, class A fire-rated
protective coating especially designed as moisture vapor barrier on facades
application.