Polyasphalt 60/70
Penetration grade bitumen
Properties
• Hot applied
• Excellent barrier against penetration of water
• Excellent resistance to chlorides and sulphates
• Conforms to the following standards: ASTM D 946, AASHTO M 20,
BS 3690
Description
Polyasphalt 60/70 is a penetration grade bitumen used as a paving grade
bitumen used for the construction of roads and asphalt pavements. This is
also used as a protective and waterproofing coating on concrete surfaces.
Categories: Bitumen Coating, Waterproofing
Make an inquiry
Related products
Bituplus G 4140
Mineral Surfaced bituminous waterproofing membrane
Properties
• High resistance to positive water & vapor pressure
• Good heat resistance
• Good dimensional stability under tension
• High puncture and fatigue resistance
• High tensile and tear strengths
• Resistant to water borne chemicals
Description
Bituplus G 4140 is a high performance polymer modified bituminous
waterproofing membrane, surfaced with reflective natural color slates
to provide maximum protection against UV. The presence of the slates
provides a mechanical protection against light foot traffic and occasional
maintenance as well as offering an aesthetic surface. It is an ideal
membrane for roofing and exposed applications where it can be placed
on top of the existing surface and providing an economical and efficient
solution to leaking roofs.
Maxi Roof Coating
Economical waterproof roof coating
Maxi Coat Roof Coating is a one pack, economical roof coating, which provides a highly flexible waterproof coating with good weather
resistance. It has long life flexibility and is ideally suited for use in areas with extreme climatic conditions and has >100% elongation.
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminium sheets
• Wood
• PU foam insulation
• Fibre cement sheeting
Consumption Rate
1.2 - 1.5 kg/m² for two coats
Packaging
5kg / 20kg
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Plastifelt ULTRA
APP modified polyester reinforced bituminous waterproofing membrane
Properties
• Excellent resistance to positive water & vapor pressure
• High durability to ageing and atmospheric agents
• Good dimensional stability under tension
• Superior flexibility. Accommodates structural
movements
• Resistant to water borne chemicals attack
Description
Plastifelt Ultra is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers,
which are blended together to obtain good waterproofing properties.
The bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement polyester.
Polyseal 1PU
One part polyurethane joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
11
Sealants
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life – won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic once cured. Can be used in potable water reservoirs and
swimming pools
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
Description
Polyseal PS GG is a non slumping two component, chemically curing polysulphide
joint sealant. Polyseal PS GG is specifically designed to be used as
a watertight seal for moderate movement and control joints. It is based on a
liquid polysulphide polymer which when mixed with the hardener, cures to
form a tough, flexible and non staining rubber like seal. Polyseal PS GG has
excellent adhesion to concrete, stone, metals and other common building
substrates. The cured sealant has good resistance to most environmental
chemicals & resists deterioration on prolonged exposure to UV. Polyseal
PS GG is suitable for use in both vertical and horizontal applications. The
sealant has a Movement Accomodation Factor (MAF) of ±25%
Description
Polyseal 1PU is a one part low modulus high performance polyurethane
sealant, which cures on absorption of atmospheric moisture to form a firm
and flexible rubber watertight seal for moderate movement and control
joints. Polyseal 1PU can be used in both horizontal and vertical applications.
Flexicoat QS200
Single pack elastomeric waterproofing
Flexicoat QS200 is a single pack fast drying waterproof coating. It provides a highly flexible waterproof coating with excellent weather resistance.
Flexicoat QS200 has long life flexibility and is ideally suitable for use in areas with extreme climatic conditions.
Area of Use
• Under tile application in bathrooms, kitchens, and on rooftops
Consumption Rate
1-1.5 kg/m2
Packaging
3.6 litre / 18 litre
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Bitustick 15
HDPE surfaced bituminous waterproofing membrane
Properties
• Cold applied, self adhesive and easy to apply
• Excellent adhesion to vertical and horizontal surfaces
• Excellent resistance to chlorides, sulphates, dilute alkalis
and acids
• Good tear and puncture resistance
• Water and vapor proof
Description
Bitustick 15 is a self adhesive polymer modified bituminous, waterproofing
sheet membrane, laminated onto a tough HDPE film on one side
and a silicone release film on the other. Bitustick 15 conforms to the
requirements of BS 8102.
Pluggit 31
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
One-component rapid setting repair mortar which is used to stop water leakages in concrete and masonry. Terraco Pluggit 311 is shrinkage
compensated and hence creates a watertight repair even under constant water pressure.
Area of Use
• To repair concrete or masonry surfaces where running water or moisture
seepage is present
• To fill static cracks and holes in foundations, tunnels, reservoirs, sewerage
pipes, basements and water tanks
Consumption Rate
1.6 kg/m2 /mm thickness
Packaging
5 x 1kg pack / 20 x 1kg pack
Unit
Plastic Pails
Shelf Life
9 months in original unopened container