Plastifelt Fibre
Fibre reinforced polymer modified bituminous waterproofing
Properties
• Excellent resistance to positive water & vapor pressure
• Good flexibility. Can take structural movements
• Good dimensional stability under tension
• Resistant to water borne chemicals
Description
Plastifelt is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers, which
are blended together to obtain good waterproofing properties. The
bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement core of non woven glass fibre carrier.
Categories: Torch-on Membranes, Waterproofing
Make an inquiry
Related products
Pluggit 31
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
One-component rapid setting repair mortar which is used to stop water leakages in concrete and masonry. Terraco Pluggit 311 is shrinkage
compensated and hence creates a watertight repair even under constant water pressure.
Area of Use
• To repair concrete or masonry surfaces where running water or moisture
seepage is present
• To fill static cracks and holes in foundations, tunnels, reservoirs, sewerage
pipes, basements and water tanks
Consumption Rate
1.6 kg/m2 /mm thickness
Packaging
5 x 1kg pack / 20 x 1kg pack
Unit
Plastic Pails
Shelf Life
9 months in original unopened container
Polymastic
Single component acrylic co-polymer mastic
Properties
• Good compatibility with paints and emulsions. Can be over painted
• Excellent resistance to weathering
• Good resistance to water and water vapour
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Fast drying
• Odorless
• Resists mildew and mould growth
• Easy to apply, one component sealant. No mixing required
• Non-staining
Description
Polymastic is a single component acrylic co-polymer mastic, which is
designed for pointing applications. The mastic on curing forms a pliable
flexible seal which can accommodate moisture and thermal movements with
minimal shrinkage.
Polymastic can be used in both horizontal and vertical applications and has
a movement accommodation factor (maf) of ±10%.
Easybit 140kg
Bitumen emulsion
Properties
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Non- flammable
• Economical
Properties
• Anti-fungal
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Can be applied in closed or confined spaces
• Water-based
Properties
xxxxx
xxxx
xxxx
xxx
xxxxx
xxx
xxx
Description
Easybit is a thixotropic bitumen emulsion. The coating is dark brown in
color and dries to a black flexible protective film. The finished film forms a
tough barrier to water and vapor transmission.
Polyseal 1PU
One part polyurethane joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
11
Sealants
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life – won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic once cured. Can be used in potable water reservoirs and
swimming pools
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Excellent adhesion to most building substrates. Can be used without the
use of primer in new substrates
• Non-toxic. Can be used in potable water reservoirs and swimming pools
• Easy to apply, one component sealant. No mixing required
• Overpainting can be done (Rigid paints may crack)
Description
Polyseal PS GG is a non slumping two component, chemically curing polysulphide
joint sealant. Polyseal PS GG is specifically designed to be used as
a watertight seal for moderate movement and control joints. It is based on a
liquid polysulphide polymer which when mixed with the hardener, cures to
form a tough, flexible and non staining rubber like seal. Polyseal PS GG has
excellent adhesion to concrete, stone, metals and other common building
substrates. The cured sealant has good resistance to most environmental
chemicals & resists deterioration on prolonged exposure to UV. Polyseal
PS GG is suitable for use in both vertical and horizontal applications. The
sealant has a Movement Accomodation Factor (MAF) of ±25%
Description
Polyseal 1PU is a one part low modulus high performance polyurethane
sealant, which cures on absorption of atmospheric moisture to form a firm
and flexible rubber watertight seal for moderate movement and control
joints. Polyseal 1PU can be used in both horizontal and vertical applications.
Polyseal PS PG
2 part pouring grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life–won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic. Can be used in potable water applications, swimming pools
Polycoat WB
Bitumen emulsion paint
PROPERTIES
Resists the attack of salts like chlorides and sulphates that are present in the soil.
Easy to apply
Cold applied
Adheres to concrete, metal, wood, cork, etc.
Asbestos free, odorless and can be applied in closed or confined spaces
Water-based and therefore is non-toxic
Non- flammable
Versatile
Economical
Conforms to ASTM D 1227, Type III, Class 1
Description
Polycoat WB is an emulsified thixotropic bitumen protective coating. The
coating dries to form a black flexible protective film. The finished film forms
a tough barrier to vapor transmission
Polycryl FR
Acrylic based flexible vapor proof protective coating
Properties
• Class A fire rated (0,10)
• Environmentally friendly. Low VOC (<10 g/L)
• Excellent UV, weatherability & color retention properties
• Single component. Easy to use
• Cold applied
• Excellent resistance to vapor and moisture
• Excellent resistance to carbon dioxide diffusion
• Excellent resistance to chloride ion penetration
• Breathable
• Good abrasion resistance properties
• Heat resistant
• Excellent adhesion on most porous and nonporous
• substrates
Description
Polycryl FR is a an acrylic based single component, class A fire-rated
protective coating especially designed as moisture vapor barrier on facades
application.
Polycoat
Bitumen emulsion paint
Properties
• Anti-fungal
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Can be applied in closed or confined spaces
• Water-based
Description
Polycoat is an emulsified thixotropic bitumen protective coating. The coating
dries to form a black flexible protective film. The finished film forms a
tough barrier to vapor transmission.