Maxi Tile paste can be used on walls of fair faced
concrete, lightweight concrete, plasterboard,
chipboard, plywood, gypsum wall, sand and
cement plasters and screeds. Maxi Tile paste is not
suitable for prolonged saturation areas such as
floors, swimming pools etc. For such areas treat as
follows:
Take a weight of cement equal to 25% of the
weight of the Maxi Tile paste to be used. Slurry this
cement, using a cement : Water ratio of 3:1.
Incorporate this slurry gradually into the Maxi
Tile paste , ensuring that it is thoroughly and evenly
mixed in
Maxi Tile Paste – TERRACO
Maxi Tile paste is an economical, high quality, all-purpose acrylic adhesive for tiles and clinkers. It is ideally
suited for use on exterior and interior surfaces of concrete, plasterboard, etc. Maxi Tilepaste is ready-mixed and
easy to apply by notched trowel.
Maxi Tile paste is formulated from a mixture of
precisely graded, crushed fillers, with an acrylic
binder and special additives to improve plasticity
and adhesion.
Description
Make an inquiry
Related products
Handycoat Stucco Putty – TERRACO
Handycoat Stucco Putty is a ready to use filler and skim-coat for most building surfaces, including sand / cement
render and gypsum board. It has an extra fine particle size to give a high quality even surface for painting.
Handycoat Stucco Putty is specially manufactured for the painter to repair and touch up interior surfaces, both
old and new, prior to painting.
PROPERTIES
Handycoat Stucco Putty is made from a selected
blend of acrylic polymers and precisely graded
fillers. The product is:
- Easy to use.
- Does not flake off.
- Has high adhesion power.
- Has high coverage.
- Quick drying.
- Vapour permeable
Styroskim Putty – TERRACO
Styroskim Putty is a ready to use flexible filler and skim coat for fine leveling of Terraco EIFS basecoat surfaces (Styrobond DP applied surface) and other masonry substrates. It gives a high quality even surface for painting.
Styroskim Putty is specially manufactured for Terraco EIFS System and sheathing board joint systems.
For EIFS: It is recommended to level out and build up thicknesses when the final finish coating used is a low profile or smooth coating.
Due to its excellent adhesion, flexibility and enhanced impact resistance, it is used for sheathing board jointing and skimming of internal and external walls and ceilings.
Maxi Acrylic Mastic – TERRACO
Maxi Acrylic Mastic is an economical general-purpose, one-pack acrylic joint mastic and crack repair filler,
for interior and exterior use. It forms a water-resistant joint and a dust and damp proof seal in situations too
demanding for normal mastics. Maxi Acrylic Mastic is available in white and grey colors.
Maxi Acrylic Mastic is a blend of pure acrylic
polymers and precisely graded fillers and
pigments. The product has the following
- Waterproof.
- Weather resistant.
- Permanent flexibility (+ 15%) of original joint size.
- Easy to apply.
- Can be over coated after drying,
- High adhesion to most building surfaces.
- Economica
Terrabond A – ACRYLIC BONDING AGENT
Terrabond A is an extremely versatile bonding agents for use with all cementitious materials, lime washes,
plasters, etc. It can be used to pre-treat substrates as an adhesion-promoting agent and as a primer/ sealer
for decorative coatings. Terrabond A is a highly concentrated and economical-to-use product, specifically
developed for the most demanding situation. It increases the compressive, tensile and flexural strengths of
mortars and reduces the water/ cement ratio. Terrabond A can be used with confidence on all exterior and
interior surfaces.
Terrabond A is a non-toxic, non-inflammable, acrylic resin
Pluggit 311 – TERRACO
Terraco Pluggit 311 is a one-component rapid setting repair mortar which is used to stop water leakages in
concrete and masonry. Terraco Pluggit 311 is shrinkage compensated and hence creates a watertight repair
even under constant water pressure.
Terraco Pluggit 311 is used to repair concrete or
masonry surfaces where running water or
moisture seepage is present. It is suitable for use
to fill static cracks and holes in foundations,
tunnels, reservoirs, sewerage pipes, basements,
water tanks, etc.
