AREAS OF USE
Handycoat Gypsum Joint Compound can be
used as a jointing compound or as a skim coat for
following Interior surfaces:
Gypsum boards
Cement boards
Concrete walls
Plastered concrete block walls
Handycoat Gypsum Joint Compound – TERRACO
Handycoat Gypsum Joint Compound is a ready to use filler for use as a jointing compound and skim coat for
gypsum boards. It can also be used as a skim coat for most building surfaces including sand/cement render.
It gives a smooth, uniform surface for painting and is especially suitable for repairing and touching up interior
surfaces, both old and new, prior to painting. Handycoat Gypsum Joint Compound can be used to fill in joints,
hairline cracks, etc. It does not flake off, is permanent and retains its adhesion.
Handycoat Gypsum Joint Compound is made
from a selected blend of polymers and graded
fillers. It has the following properties.
<ul>
<li>Easy to sand and fast drying</li>
<li>Easy to use</li>
<li>Good adhesion</li>
<li>Good jointing properties</li>
<li>Vapour permeable</li>
<li>Environmentally friendly</li>
Description
Make an inquiry
Related products
Maxi Tile Paste – TERRACO
Maxi Tile paste is an economical, high quality, all-purpose acrylic adhesive for tiles and clinkers. It is ideally
suited for use on exterior and interior surfaces of concrete, plasterboard, etc. Maxi Tilepaste is ready-mixed and
easy to apply by notched trowel.
Maxi Tile paste is formulated from a mixture of
precisely graded, crushed fillers, with an acrylic
binder and special additives to improve plasticity
and adhesion.
Terrabond A – ACRYLIC BONDING AGENT
Terrabond A is an extremely versatile bonding agents for use with all cementitious materials, lime washes,
plasters, etc. It can be used to pre-treat substrates as an adhesion-promoting agent and as a primer/ sealer
for decorative coatings. Terrabond A is a highly concentrated and economical-to-use product, specifically
developed for the most demanding situation. It increases the compressive, tensile and flexural strengths of
mortars and reduces the water/ cement ratio. Terrabond A can be used with confidence on all exterior and
interior surfaces.
Terrabond A is a non-toxic, non-inflammable, acrylic resin
Pluggit 311 – TERRACO
Terraco Pluggit 311 is a one-component rapid setting repair mortar which is used to stop water leakages in
concrete and masonry. Terraco Pluggit 311 is shrinkage compensated and hence creates a watertight repair
even under constant water pressure.
Terraco Pluggit 311 is used to repair concrete or
masonry surfaces where running water or
moisture seepage is present. It is suitable for use
to fill static cracks and holes in foundations,
tunnels, reservoirs, sewerage pipes, basements,
water tanks, etc.
Styroskim Putty – TERRACO
Styroskim Putty is a ready to use flexible filler and skim coat for fine leveling of Terraco EIFS basecoat surfaces (Styrobond DP applied surface) and other masonry substrates. It gives a high quality even surface for painting.
Styroskim Putty is specially manufactured for Terraco EIFS System and sheathing board joint systems.
For EIFS: It is recommended to level out and build up thicknesses when the final finish coating used is a low profile or smooth coating.
Due to its excellent adhesion, flexibility and enhanced impact resistance, it is used for sheathing board jointing and skimming of internal and external walls and ceilings.
Acrylic Crack Filler – TERRACO
Acrylic Filler is a ready to use filler for use on all common building surfaces, including timber. It gives a high
quality, even surface for painting. Acrylic Filler is specifically manufactured for the painter to repair and touch
up exterior and interior surfaces, both new and old, prior to painting. It is designed for filling joints, hairline
cracks etc. by hand application. Unlike conventional fillers, Acrylic Filler has elastic properties, does not flake
off, is permanent and retains its adhesion.
Acrylic Filler is a quick drying ready-mixed paste
formulated using acrylic binders and precisely
graded white marble powder.
Handycoat Stucco Putty – TERRACO
Handycoat Stucco Putty is a ready to use filler and skim-coat for most building surfaces, including sand / cement
render and gypsum board. It has an extra fine particle size to give a high quality even surface for painting.
Handycoat Stucco Putty is specially manufactured for the painter to repair and touch up interior surfaces, both
old and new, prior to painting.
PROPERTIES
Handycoat Stucco Putty is made from a selected
blend of acrylic polymers and precisely graded
fillers. The product is:
- Easy to use.
- Does not flake off.
- Has high adhesion power.
- Has high coverage.
- Quick drying.
- Vapour permeable
