FEVICOL CA 777
Fevicol CA 777 is a superior grade rubber based contact adhesive design to deliver very high strength immediately on bond formation. Laminate pasting on MDF, HDF, Plywood, Particle board etc. Bus body and automotive interiors. Bonds all types of laminated plastics to wood, metal, plaster etc.
Available 602 ml
Categories: Adhesives, Adhesives, Glues & Sealants
Make an inquiry
Related products
Pattex FT101
Pattex FT101 is an all purpose, moisture curing, elastic joint sealant and multipurpose adhesive for indoor and outdoor.
No shrinkage during curing and can be painted after curing. It provides excellent adhesion to a wide range of construction materials
- High Transparency
- Paintable once cured
- Suitable for use on delicate surfaces such as mirrors, polystyrene and polycarbonate
- Suitable for interior and exterior use
- Bonds to damp surfaces
- Waterproof and UV resistant once cured
- Permanently flexible and durable
- Resistant to temperatures from -40 C to +80 C
PATTEX PL200
PATTEX PL200 is a professional polymer-based construction adhesive.
It is highly suitable for absorbent and non-absorbent surfaces like: Bricks, Ceramics, Metals, Plasterboards, Stone, Plastics.
• High Initial Tack
• For all materials and substrates*
• Water-resistant
• For interior and exterior applications
• Solvent free
Sikacryl -110 (Acrylic Sealant)
Sikacryl®-110 is a 1-component acrylic dispersion sealant for indoor crack and joint filling.
Sikacryl®-110 is designed for interior crack and joint
filling with low movement. Sikacryl®-110 is also suitable for duct sealing in HVAC applications.
Suitable for use in hot and tropical climatic conditions.
▪ Good application properties
▪ Movement cabability of ±7.5 %
▪ Mildew and fungus resistant
▪ Over-paintable
▪ Good adhesion on various substrates
▪ For interior use
Asmaco 2540 – Silicone Sealant
One part Acetic Cure, solvent free Silicone Sealant. Suitable for general construction applications. It has excellent resistant to ageing, shrinkage, cracking and discoloring. The antifungal properties makes it ideal for Sanitary applications
- Easy-to-use one component type.
- Antifungal to suit sanitary and wet area applications
- Cures at room temperature at ambient humidity conditions.
- Outstanding adhesiveness too many non-porous substrates, including Glass, Glazed Ceramics, Aluminum, Masonry, some Plastics etc .
- All temperature gun ability - can be applied in all temperatures.
- Wide service temperatures range from -20°C to 110°C
- Excellent resistance to weathering, moisture, ozone, UV, temperature Extremes etc.
Polybit CM 11 COMFORT – Tile Adhesive
Polybit CM 11 is a low-emission Leed designed tile
adhesive for fixing tiles on:
- Cement and cement-lime plasters, cement screeds, cement ground coats, concrete substrates.
- Light weight AAC blocks / concrete block insulation materials like wood-cement boards and sound deadening panels primed with CT 17.
- Gypsum and anhydrite substrates (inside) primed with CT 17.
- Wet areas (with periodic water penetration) e.g. bathrooms, kitchens, toilets
- Utility rooms as cellars, storerooms, drying rooms, corridors, stairs,anterooms, living rooms, parking, balconies, terraces.
- Polybit CM 11 should not be used (unless the elastic emulsion CC 83 is added):
- On deformable substrates such as: primed plasterboards, wood chip-boards, heated floors.
TUF-FIX Silicone Sealant
Sikasil 116 GP
ikasil-116 GP is a 1-component, general purpose silicone sealant.
Suitable for use in hot an tropical climatic conditions.
asil-116 GP is designed for glazing and weatherproofing applications on non-porous substrates such
as glass or glazed ceramic tiles. Sikasil-116 GP can be
used for inside and outside applications.
- Good resistance to shrinkage, cracking and discoloration
- UV and weathering resistant
- Good adhesion to a variety of non-porous substrates
Tilebond Tile Adhesive
Tilebond 2000 is an easy to apply mortar for the mounting and laying
of ceramic tiles, glazed and unglazed clinkers and mosaics. It is suitable
for use on walls and floors of concrete, lightweight concrete and plaster
for both exterior and interior surfaces. Tilebond 2000 provides excellent adhesion between the tile and
substrate.
Available 25KG Bag.