Dry Stucco
Dry Stucco is used as a decorative coating for:
- Walls and ceilings
- Exterior walls
- Material in architecture
- Construction metal
- Expanded metal lath
- Concrete cinder block
- Clay brick
- Structural material
Make an inquiry
Related products
Pluggit 311 – TERRACO
Terraco Pluggit 311 is a one-component rapid setting repair mortar which is used to stop water leakages in
concrete and masonry. Terraco Pluggit 311 is shrinkage compensated and hence creates a watertight repair
even under constant water pressure.
Terraco Pluggit 311 is used to repair concrete or
masonry surfaces where running water or
moisture seepage is present. It is suitable for use
to fill static cracks and holes in foundations,
tunnels, reservoirs, sewerage pipes, basements,
water tanks, etc.
Handycoat Gypsum Joint Compound – TERRACO
Handycoat Gypsum Joint Compound is a ready to use filler for use as a jointing compound and skim coat for
gypsum boards. It can also be used as a skim coat for most building surfaces including sand/cement render.
It gives a smooth, uniform surface for painting and is especially suitable for repairing and touching up interior
surfaces, both old and new, prior to painting. Handycoat Gypsum Joint Compound can be used to fill in joints,
hairline cracks, etc. It does not flake off, is permanent and retains its adhesion.
Handycoat Gypsum Joint Compound is made
from a selected blend of polymers and graded
fillers. It has the following properties.
<ul>
<li>Easy to sand and fast drying</li>
<li>Easy to use</li>
<li>Good adhesion</li>
<li>Good jointing properties</li>
<li>Vapour permeable</li>
<li>Environmentally friendly</li>
Terrabond A – ACRYLIC BONDING AGENT
Terrabond A is an extremely versatile bonding agents for use with all cementitious materials, lime washes,
plasters, etc. It can be used to pre-treat substrates as an adhesion-promoting agent and as a primer/ sealer
for decorative coatings. Terrabond A is a highly concentrated and economical-to-use product, specifically
developed for the most demanding situation. It increases the compressive, tensile and flexural strengths of
mortars and reduces the water/ cement ratio. Terrabond A can be used with confidence on all exterior and
interior surfaces.
Terrabond A is a non-toxic, non-inflammable, acrylic resin
Handycoat Stucco Putty – TERRACO
Handycoat Stucco Putty is a ready to use filler and skim-coat for most building surfaces, including sand / cement
render and gypsum board. It has an extra fine particle size to give a high quality even surface for painting.
Handycoat Stucco Putty is specially manufactured for the painter to repair and touch up interior surfaces, both
old and new, prior to painting.
PROPERTIES
Handycoat Stucco Putty is made from a selected
blend of acrylic polymers and precisely graded
fillers. The product is:
- Easy to use.
- Does not flake off.
- Has high adhesion power.
- Has high coverage.
- Quick drying.
- Vapour permeable
Maxi Acrylic Mastic – TERRACO
Maxi Acrylic Mastic is an economical general-purpose, one-pack acrylic joint mastic and crack repair filler,
for interior and exterior use. It forms a water-resistant joint and a dust and damp proof seal in situations too
demanding for normal mastics. Maxi Acrylic Mastic is available in white and grey colors.
Maxi Acrylic Mastic is a blend of pure acrylic
polymers and precisely graded fillers and
pigments. The product has the following
- Waterproof.
- Weather resistant.
- Permanent flexibility (+ 15%) of original joint size.
- Easy to apply.
- Can be over coated after drying,
- High adhesion to most building surfaces.
- Economica