Bituprime SB
Solvent based bitumen primer
Properties
• Improves the adhesion between bitumen based sheet membranes and
coatings Cold applied, does not require heating Binder for dust particles
Anti corrosive
• Conforms to the following standards ASTM D 41 – Asphalt primer for
roofing, damp proofing and waterproofing BS 3416, Type A Class C –
Bitumen based coatings for cold application, suitable for use in contact
with potable water.
Description
Bituprime SB is a quick drying solvent based low viscosity bitumen primer.
It is used as a primer coat on masonry and concrete substrates to improve
the adhesion of bitumen based membranes and coatings.
Make an inquiry
Related products
Polyseal PS GG
2 part gun grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life – won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic once cured. Can be used in potable water reservoirs and
swimming pools
Flexiroof
Acrylic waterproof roof coating
XXXXXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
TERRACO ACRYLIC
A one pack roof coating with long life flexibility and is ideally suitable for use in areas with extreme climatic conditions. It is applied by
brush, spray or rubber squeegee and has >400% elongation.
Flexiroof is a highly flexible roof coating with good weather resistance. Due to its long life flexibility it is ideally suited for use in areas of
extreme climate conditions and has >200% elongation.
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminum sheets
• Wood
• PU Foam insulation
Consumption Rate
1.0 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminium sheets
• Fibre Cement sheeting
• Wood
• PU Foam Insulation
Consumption Rate
1.1 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Terraproof
Cement water proofing compound
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
Area of Use
• Terraproof is ideally suited to all external finishing needs where
moisture needs to be contained or excluded.
For example - backing coats of thin layer Terramix plaster.
Consumption Rate
Terraproof should be mixed with cement in the ratio of 1kg of
Terraproof to every 50kg bag of cement
Packaging
1kg
Unit
Plastic Bag
Shelf Life
6 months in original unopened packs
Pluggit 31
Cement based rapid setting water-stop mortar
Terraproof is an economical cement waterproofing compound, in fine powder form. It is used to prevent absorption of moisture into the
capillaries of cement mortar and concrete and results in a finished surface with high water repellence. It contains no calcium chloride
One-component rapid setting repair mortar which is used to stop water leakages in concrete and masonry. Terraco Pluggit 311 is shrinkage
compensated and hence creates a watertight repair even under constant water pressure.
Area of Use
• To repair concrete or masonry surfaces where running water or moisture
seepage is present
• To fill static cracks and holes in foundations, tunnels, reservoirs, sewerage
pipes, basements and water tanks
Consumption Rate
1.6 kg/m2 /mm thickness
Packaging
5 x 1kg pack / 20 x 1kg pack
Unit
Plastic Pails
Shelf Life
9 months in original unopened container
Terraseal
Cementitious acrylic moisture barrier coating for facade & curtain walls
TERRACO ACRYLIC
Terraseal is an economical, two-component, cement based, polymerized, permanently waterproof, flexible barrier coating suitable for use
as a moisture barrier on facades and behind curtain walling.
Area of Use
• Moisture barrier
• Facade waterproofing
• Curtain wall waterproofing
Consumption Rate
1.9 - 2.9 kg/m2 for 1-1.5mm total thickness
Packaging
25kg
Unit
Combi pack: Terraseal Resin: 5kg Jerrican
Terraseal Powder: 15kg Paper Bag
Shelf Life
12 months in original unopened containers.
Polyseal PS PG
2 part pouring grade polysulphide joint sealant
Properties
• Highly resilient with excellent recovery characteristics
• Provides permanent and uniform watertight seal
• Non-staining
• Excellent resistance to fatigue and stays flexible throughout its service
life–won’t become brittle, caulk or crack due to ultra violet exposure
• Prevents uncontrolled cracking by allowing expansion and contraction
during temperature changes
• Excellent adhesion to most common building substrates
• Good resistance to ageing. Retains joint soundness once cured
• Resistance against mild chemicals, hydrocarbon fuels, sea water
• Non-toxic. Can be used in potable water applications, swimming pools
Polytex
Elastomeric acrylic waterproofing and protective coating
Properties
• Single component, easy to apply
• Protects exposed concrete structures against carbonation and ingress of
atmospheric gases and salts
• Excellent UV resistance
• Elastomeric- high crack bridging capability
• Excellent adhesion to most of the substrates
• Good resistance to dilute acids, alcohol, hydrocarbons, chloride and
sulphate ions
Description
Polytex is a single component, elastomeric, acrylic waterproofing and
protective coating. Polytex upon curing forms a tough, flexible and durable
coating which is resistant to UV and other weathering agents.
Plastifelt ULTRA
APP modified polyester reinforced bituminous waterproofing membrane
Properties
• Excellent resistance to positive water & vapor pressure
• High durability to ageing and atmospheric agents
• Good dimensional stability under tension
• Superior flexibility. Accommodates structural
movements
• Resistant to water borne chemicals attack
Description
Plastifelt Ultra is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers,
which are blended together to obtain good waterproofing properties.
The bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement polyester.