Bituplus G 4140
Mineral Surfaced bituminous waterproofing membrane
Properties
• High resistance to positive water & vapor pressure
• Good heat resistance
• Good dimensional stability under tension
• High puncture and fatigue resistance
• High tensile and tear strengths
• Resistant to water borne chemicals
Description
Bituplus G 4140 is a high performance polymer modified bituminous
waterproofing membrane, surfaced with reflective natural color slates
to provide maximum protection against UV. The presence of the slates
provides a mechanical protection against light foot traffic and occasional
maintenance as well as offering an aesthetic surface. It is an ideal
membrane for roofing and exposed applications where it can be placed
on top of the existing surface and providing an economical and efficient
solution to leaking roofs.
Bituplus G4140 (Granulated)
Properties
• High resistance to positive water & vapor pressure.
• Good dimensional stability under tension
• Good flexibility. Can accommodate structural movements
• High puncture and fatigue resistance
• Resists water borne chemicals
• High heat resistance
Description
Bituplus Granulated is a high performance polymer modified bituminous
waterproofing membrane, surfaced with reflective natural color
slates to provide maximum protection against UV. The presence of the
slates provides a mechanical protection against light foot traffic and
occasional maintenance as well as offering an aesthetic surface.
Bituplus Ultra P4180
APP modified bituminous waterproofing membrane
Properties
• Polymer rich compound. Easy and strong seal on over
laps.
• High flexibility. Easy application on corner profiles and
detailings.
• High softening point. Does not leave shoe imprints or
makes the bitumen sticky during high temperature
applications.
• High resistance against hydrostatic pressure.
• Good dimensional stability under tension.
• User friendly printed films with stick timer aids easy
and correct application.
• High mechanical strengths and fatigue resistance prop
erties.
Bituprime SB
Solvent based bitumen primer
Properties
• Improves the adhesion between bitumen based sheet membranes and
coatings Cold applied, does not require heating Binder for dust particles
Anti corrosive
• Conforms to the following standards ASTM D 41 - Asphalt primer for
roofing, damp proofing and waterproofing BS 3416, Type A Class C -
Bitumen based coatings for cold application, suitable for use in contact
with potable water.
Description
Bituprime SB is a quick drying solvent based low viscosity bitumen primer.
It is used as a primer coat on masonry and concrete substrates to improve
the adhesion of bitumen based membranes and coatings.
Bitustick 15
HDPE surfaced bituminous waterproofing membrane
Properties
• Cold applied, self adhesive and easy to apply
• Excellent adhesion to vertical and horizontal surfaces
• Excellent resistance to chlorides, sulphates, dilute alkalis
and acids
• Good tear and puncture resistance
• Water and vapor proof
Description
Bitustick 15 is a self adhesive polymer modified bituminous, waterproofing
sheet membrane, laminated onto a tough HDPE film on one side
and a silicone release film on the other. Bitustick 15 conforms to the
requirements of BS 8102.
Easybit 140kg
Bitumen emulsion
Properties
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Non- flammable
• Economical
Properties
• Anti-fungal
• Resists the attack of salts like chlorides and sulphates that are pres
ent in the soil
• Easy to apply
• Cold applied
• Adheres to concrete, metal, wood, cork, etc.
• Can be applied in closed or confined spaces
• Water-based
Properties
xxxxx
xxxx
xxxx
xxx
xxxxx
xxx
xxx
Description
Easybit is a thixotropic bitumen emulsion. The coating is dark brown in
color and dries to a black flexible protective film. The finished film forms a
tough barrier to water and vapor transmission.
Flexicoat QS200
Single pack elastomeric waterproofing
Flexicoat QS200 is a single pack fast drying waterproof coating. It provides a highly flexible waterproof coating with excellent weather resistance.
Flexicoat QS200 has long life flexibility and is ideally suitable for use in areas with extreme climatic conditions.
Area of Use
• Under tile application in bathrooms, kitchens, and on rooftops
Consumption Rate
1-1.5 kg/m2
Packaging
3.6 litre / 18 litre
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Flexiroof
Acrylic waterproof roof coating
XXXXXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
TERRACO ACRYLIC
A one pack roof coating with long life flexibility and is ideally suitable for use in areas with extreme climatic conditions. It is applied by
brush, spray or rubber squeegee and has >400% elongation.
Flexiroof is a highly flexible roof coating with good weather resistance. Due to its long life flexibility it is ideally suited for use in areas of
extreme climate conditions and has >200% elongation.
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminum sheets
• Wood
• PU Foam insulation
Consumption Rate
1.0 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminium sheets
• Fibre Cement sheeting
• Wood
• PU Foam Insulation
Consumption Rate
1.1 - 1.5 kg/m² for two coats
Packaging
5Ltr / 20Ltr
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Maxi Roof Coating
Economical waterproof roof coating
Maxi Coat Roof Coating is a one pack, economical roof coating, which provides a highly flexible waterproof coating with good weather
resistance. It has long life flexibility and is ideally suited for use in areas with extreme climatic conditions and has >100% elongation.
Area of Use
• Concrete, lightweight concrete, roof tiles
• Galvanized steel, corrugated aluminium sheets
• Wood
• PU foam insulation
• Fibre cement sheeting
Consumption Rate
1.2 - 1.5 kg/m² for two coats
Packaging
5kg / 20kg
Unit
Plastic Pail
Shelf Life
12 months in original unopened containers
Maxicrete
General purpose cementitious acrylic waterproof slurry
A high quality, versatile, permanent waterproofing system for roofs, facades, wet rooms and water retaining structures. The system will
adhere to new and old surfaces of precast and in-situ concrete.
An economical, two-component, permanent waterproofing system for concrete and masonry. After application, the Maxicrete system forms
a tough, durable waterproof coating.
Area of Use
Under tile application:
• Bathrooms
• Kitchens
• Balconies
Consumption Rate
• 2.2 - 3.7 kg/m² applied in 2 to 3 coats to achieve an overall
thickness of 1.4mm to 2mm.
• For under tile application: 1.4mm to 1.6mm total application
thickness is recommended.
Packaging
Combi pack : 20.9kg Pail [5kg resin (Jerrican) +
15kg powder (Bag) and 900ml primer
(Bottle)].
Regular pack : Resin: 5kg jerrican
Powder: 15kg paper bags
Shelf Life
12 months in original unopened containers
Plastifelt Fibre
Fibre reinforced polymer modified bituminous waterproofing
Properties
• Excellent resistance to positive water & vapor pressure
• Good flexibility. Can take structural movements
• Good dimensional stability under tension
• Resistant to water borne chemicals
Description
Plastifelt is a polymer modified bituminous waterproofing membrane,
manufactured from a mixture of bitumen and selected polymers, which
are blended together to obtain good waterproofing properties. The
bitumen compound also exhibits high heat and UV resistance properties.
The polymerized bitumen is coated on to a dimensionally stable
reinforcement core of non woven glass fibre carrier.